Commercial Door

Hardware Options

No Lock/No Bore (standard)

Hinges (standard)
4 ½" X 4 ½" square corner ball bearing hinges
Available in: Satin Chrome US 26D, Bronze US10A, Brass, US3 and Stainless Steel US32D

Hardware Routs and Prep

Marvin offers a wide variety of hardware preps for rim, vertical rod, and push bar devices as well as preps for mortise, cylindrical, and tubular locks. Prepped doors allow for easier hardware installation on the jobsite, eliminating what can be a labor-intensive operation in the field. Routs and prep can be ordered for the following hardware:

VonDuprin
  • 98 Series hardware (rim device)
  • 9827 Series hardware (surface vertical rod)
  • 88 Series hardware (rim device)
  • 8827 Series hardware (surface vertical rod)
  • 9847 Series hardware (Concealed vertical rod)
Schlage
  • L Series Mortise Locks
  • ND Series Cylindril Locks
Alarm Lock
  • Trilogy Series
Requests for custom routs may be submitted.

Commercial Hardware Package

The Commercial Hardware Package includes the following components. Each item may be purchased individually, if desired.
Closer
  • LCN 1461 EDA SRT push side
Available in: Aluminum BHMA689, Dark Bronze BHMA695, Brass BHMA696
Removable Center Mullion
  • Von Duprin 4953 keyed or non-keyed
  • Available for wood, clad-wood and steel frames.
  • Wood and clad-wood frames must be field-modified to accommodate the removable center mullion.

Available in: Sprayed Aluminum SP28, Bronze SP313
Panic Rim
Von Duprin 98 lever or exit only
Available in: Satin Chrome US26D, Bronze US10B, Brass US3

- Or -

Mortise Lock Operator with Lever
Schlage L series entrance or corridor functions.
Available for single, X doors only.
Available in: Satin Chrome BHMA626, Bronze BHMA 613, Brass BHMA 603
Kick Plate
10" X 34" Stainless steel
Available in: Stainless Steel US32D, Bronze US10B, Brass US4
 


Hardware Finish Options


Satin Chrome US26D

Satin Chrome BHMA626

Stainless Steel US32D

Aluminum BHMA689

Sprayed Aluminum SP28

Bronze US10A

Bronze US10B

Bronze SP313

Brass BHMA696

Brass US3

Brass US4
 
Hardware finish samples are approximate. Please visit your local Marvin retailer to see hardware finish samples.


Door Sill Options, Weather Strip and Sweep



Sill Options

1/2" Low-profile sill (standard)
Available in: Mill Finish Aluminum, Bronze Anodized Aluminum, Gold Anodized Aluminum
1/4" Saddle sill
Available in: Mill Finish Aluminum, Bronze Anodized Aluminum, Gold Anodized Aluminum
Offset Saddle ¼" interior / ½" exterior
Available in: Mill Finish Aluminum, Bronze Anodized Aluminum, Gold Anodized Aluminum

Sill Finish Options

Mill Finish Aluminum

Bronze Anodized Aluminum

Gold Anodized Aluminum

Weatherstrip and Sweep (standard)
  • Beige bulb type weatherstrip at top rails and hinge stiles. Optional: Black.
  • Gray pile type weatherstrip at locking stiles.
  • Brush type sweep with drip at bottom rails, gray bristles.

* Finish samples are approximate. Please visit your local Marvin retailer to see hardware finish samples.
 


Installation Accessories

Marvin offers a full range of installation accessories to support a wide range of installation scenarios:

  • Vinyl nailing fins (standard)
  • Installation brackets
    • 6 3/8" (162 mm)
    • 9 3/8" (238 mm)
    • 15 5/8" (397 mm)
  • Drip cap
  • Masonry clips


Panning Systems, Frame Extenders, Frame Expanders, Mullion Covers and Color-matched Coil Stock

These exterior accessories aid in remodeling and replacement installations when existing conditions around the perimeter of the window or door need to be covered. For use with Marvin clad-wood products.

FEED

Sending thanks to all of employees for their continuous commitment and hard work...

Sending thanks to all of employees for their continuous commitment and hard work. Happy Labor ...